Martin User Forum (closed)
Martin User Forum (closed)
Home | Profile | Active Topics | Members | Search | FAQ
Save Password
 All Forums
 M1 and M6 Hardware
 Firmware Update
 Forum Locked
Author Previous Topic Topic Next Topic  


11 Posts

Posted - 09 Feb 2015 :  04:38:21  Show Profile
I updated our M1 to the latest software and the console is saying the
firmware needs updating. where can I download the appropriate firmware?


810 Posts

Posted - 09 Feb 2015 :  04:54:22  Show Profile
The firmware is there. It is part of the installer you have to manually update the modules. (out of the manual.)

When a new console firmware version becomes available, you can update the firmware within the console software. This should not be done during a show run, as the console will "Stop Services" while it updates the firmware.

To update the firmware on the console or MPC system:

1. Press the "Menu" hardkey to access the menu.

2. Navigate to the "System" tab.

3. Choose the "Tools" page.

4. Under the maintenance "Diagnostic" section choose "Firmware Update" from the options.

5. The console will briefly show a message telling you its "Stopping Services" - This is normal.

6. A window will appear showing all the USB and IIC Devices it can find.

7. Select a USB Device then press "Update Firmware"

8. Browse to your console type folder and check to see if there is any new firmware for the selected device. (Firmware is placed onto the Hard Drive during a software install or update)

9. Repeat steps 7 & 8 for all USB and IIC devices available and exit the firmware update section.

10. A console restart is required before the firmware changes take effect.

Go to Top of Page

Ofer Brum

6911 Posts

Posted - 09 Feb 2015 :  06:12:53  Show Profile
Here you go:
Go to Top of Page

Kris VH

1629 Posts

Posted - 02 Mar 2015 :  16:34:20  Show Profile
Look here on the service pages of the M1 on the Martin Website (Firmware Installation Instructions)
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
Jump To:
Martin User Forum (closed) © 2017 Martin Professional Go To Top Of Page
Snitz Forums 2000