Martin User Forum (closed)
Martin User Forum (closed)
Home | Profile | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
 All Forums
 Controllers
 P3 System Controller
 P3 System Controller Recovery Wizards
 Forum Locked  Topic Locked
Author Previous Topic Topic Next Topic  

Wouter Verlinden

294 Posts

Posted - 04 May 2015 :  10:47:37  Show Profile
Following recovery wizards can be used to restore a P3 System Controller with corrupt software.

P3-100/P3-200 Recovery Wizard: http://martin.com/Martin.Download.aspx?file=/files/files/productdocuments/12_SOFTWARE/999/P3-100_200-RecoveryWizard-4.0.3.zip
-> Power off P3-100/200 System Controller
-> Eject CompactFlash Card located behind the right-side frontpanel (behind frontpanel USB connectors, requires 2 screws to be removed)
-> Insert the CompactFlash Card into a Card Reader connected to a computer
-> Download the application above
-> Install application on Windows PC
-> Run application to format and re-install the P3-100/200 software completely
-> Re-insert the CompactFlash Card into the P3-100/200
-> Fasten right-side frontpanel again using the screws
-> Power up system

P3-300 Recovery Wizard: http://martin.com/Martin.Download.aspx?file=/files/files/productdocuments/12_SOFTWARE/999/P3-300-RecoveryWizard-4.0.3.zip
-> Power off P3-300 System Controller and remove lid
-> Eject SD Card located underneath the bottom right of the raised DSP Board
-> Insert the SD Card into a Card Reader connected to a computer
-> If needed, re-format the SD card (FAT32)
-> Download the ZIP file above
-> Extract following files from the ZIP file:
- dsp_card.fpga
- reload_fw
- rootfs.tar.gz
- uImage
-> Copy the four files above onto the SD Card
-> Re-insert the SD Card into the DSP Card
-> Close lid
-> Power up system
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
Jump To:
Martin User Forum (closed) © 2017 Martin Professional Go To Top Of Page
Snitz Forums 2000