Martin User Forum (closed)
Martin User Forum (closed)
Home | Profile | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
 All Forums
 Controllers
 Martin M-PC installation support
 Enttec DMX USB PRO
 Forum Locked
Author Previous Topic Topic Next Topic  

stuartwg

2 Posts

Posted - 05 Jan 2014 :  11:26:14  Show Profile
Hello Everybody,

Just borrowed a friends Enttec USB DMX PRO to test out before buying my own. I am not able to get it to connect with my Acer Aspire V5 computer when I use M-PC. It has been Given a COM port (COM3) and I have installed all the Drivers. It can be seen in the DMX settings and when I use the Enttec Pro Utility I can output DMX it just seems to be in M-PC itself. Can anybody give me a hand and tell me what I am doing wrong...

Stuart

mzagarn

810 Posts

Posted - 05 Jan 2014 :  12:20:29  Show Profile
Hi Stuart and welcome. There are a few setting in mpc that need to be enable to make it work. See attached. http://www.martin.com/controllersupport/m-series/manual/routing.html

Also what version of the software are you using and what version of windows?

Hope this helps. Clear Systems was talking about another training session this year. Worth following their face book page for more information. They will also be able to help with the enttec usb boxes as well. I am out of the office until late Jan early feb.
https://www.facebook.com/pages/Clear-Systems/208598075825029?fref=ts
Go to Top of Page

stuartwg

2 Posts

Posted - 05 Jan 2014 :  12:29:41  Show Profile
Hi Mzagarn, Im running windows 8 and the software version is 3.22.458.0

thats all working now, thanks for that, I knew it would be something silly that I had forgotten to do, I'm quite familiar with the M2go and the software itself, just needed to get it out of my computer!!!

Thanks again,
Stuart
Go to Top of Page

mzagarn

810 Posts

Posted - 05 Jan 2014 :  12:48:49  Show Profile
No Problems mate have a good one.
Go to Top of Page

sonicflight

13 Posts

Posted - 11 Jan 2014 :  16:03:01  Show Profile
I in the DM2USB tab it is not showing the Enttec USB DMO Pro Mk2 interfeace. It is configured properly and I can use the Enttec interface manager to see the device properly and I can send DMX values for channels from the manager - so it is working.

What am I missing..? I followed your link on setting up the Enttec interface but still not working.

I am running Windows 8.

Txs
Gary
Go to Top of Page

sonicflight

13 Posts

Posted - 11 Jan 2014 :  16:22:40  Show Profile
OK... I changed the language from 'Pro' to 'OpenDMX' and it now sees the Enttec Mk2 device. However, in the routing screen, I still cannot get it active to show routing out of DMX Universe port 1. It is still not outputting DMX through the Enttec interface.

?
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
Jump To:
Martin User Forum (closed) © 2017 Martin Professional Go To Top Of Page
Snitz Forums 2000