Martin User Forum (closed)
Martin User Forum (closed)
Home | Profile | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
 All Forums
 Controllers
 M2GO/M2PC/M-TOUCH Hardware
 M2PC internal touchscreen
 Forum Locked
Author Previous Topic Topic Next Topic  

jhenkins84

93 Posts

Posted - 11 Mar 2015 :  01:33:05  Show Profile
I just received my new M2PC and I love it. Only problem is, the small internal touchscreen won't register a touch in M-PC

I ran the Console Tester and the touchscreen does register a touch. The actual display works fine, just the touch doesn't register in the software. I have checked to make sure the latest firmware is installed.

When I try to calibrate the touch screen in the System/Display settings, I get nothing when confirming I want to calibrate.

Have also tried on two different laptops, on both USB 2.0 and 3.0 and had the same problem on both computers.

Any suggestions?

Paul Pelletier

10024 Posts

Posted - 11 Mar 2015 :  02:49:02  Show Profile
When you calibrate the small touch screen do you see the two arrows and the square in the center?

to calibrate you have to use a single finger and swipe arrow 1 and then arrow 2 and finally press the middle square.

At this point the calibration window goes away.
Go to Top of Page

jhenkins84

93 Posts

Posted - 11 Mar 2015 :  03:28:40  Show Profile
At first, the calibration window never appeared. After you explained the procedure, I hit the button to calibrate, swiped up and down on the screen then touched the center. The screen actually started responding to touch, so I hit the Calibrate button again, and this time the calibration window appeared on the touchscreen and everything calibrated fine.

Not sure if this is a potential bug?
Go to Top of Page

Paul Pelletier

10024 Posts

Posted - 11 Mar 2015 :  04:10:25  Show Profile
Ok, never witness that one.
Thanks for the info, we will keep this in mind.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
Jump To:
Martin User Forum (closed) © 2017 Martin Professional Go To Top Of Page
Snitz Forums 2000