When I have an M-Touch Forcetouch playback button configured as 'Flash' it lights up while I'm pressing it to show that button's cue is running, which is very helpful feedback.
But if I have one of those playback buttons configured as 'Go' or 'Toggle' it does NOT light up when the cue is running.
That seems inconsistent. To me it seems that whenever a playback button's cue is running that button should be lit (regardless of running because of Flash or Go), and when that button's cue is not running (released) it should not be lit. It would be VERY helpful if that were the case. It would make it quick and easy to see which playback buttons are actively running and which aren't.
I'm wondering if that is what's supposed to happen and maybe something is wrong with my M-Touch or its firmware?
(To be clear, I'm referring to the 10 standalone Forcetouch playback and function buttons, not the Forcetocuh buttons under the faders - since the fader playbacks already have LEDs on the top two buttons that light up to give visual feedback that a fader's cuelist is active/running.)